Add Scanning Capabilites to Your Huntron Tracker M...

Add Scanning Capabilites to Your Huntron Tracker Model 30 SystemAddinga Huntron® Scanner to your Tracker Model 30 system lets you access componentsusing standard DIP clips and cables, custom cables to PCB connectors orinterface to a bed-of-nails.You can compare one component with another inreal-time (64 pins max.) or use your PC to automate testing and scan up to 128pins.Huntron Scanners can be used with a Huntron Access Prober to provide Commonline connections while the Prober is probing a PCB. This method gives you up to128 selectable Commons to use. For example, you can connect the Scanner to aconnector on a PCB mounted in the Prober using a common ribbon style cable.While the Prober is probing, any one of the lines on the connected ribbon cablecan be selected as the Common reference. This would provide you truepoint-to-point testing capabilities.Note: The ProTrack Scanner will be replacedby the Scanner II and/or the Scanner 31S effective 1/1/2008. This applies tocommercial sales only.Scanner II and Scaner 31S users may want to consider theseOptional Accessories to enhance their testcapabilities.Highlights:Desing By kuzey....The Scanner II and Scanner31S accessories add scanning capability to the Tracker Model 30All Scannershave a minimum 64 pin capabilityThe Scanner II can scan up to 128 pins whenthe A and B channels are combinedThe Scanner 31S use standard IDC styleconnectorsThe Scanner II uses the common SCSI-2 (68 pin) style connectorsUp to 8 Scanner IIs can be “daisy-chained” to increase the available numberof test pinsSelecting Accessories for your Scanner IIThe Scanner IIaccessories for interfacing to your printed circuit board come "ala carte". Thismeans that you select the accessories you want included with your Scanner.Choose from SMT or through-hole style DIP clip and cable kits (Scanner Adapterrequired with Scanner II) or a mutli-pin breakout cable. Details on theseaccessories are provided on this page